The Engineers who created
the Wilson Trucker C.B. Antenna have designed a cellular antenna that connects
directly to your cellphone with an external antenna adapter. No other
manufacturers cellular antenna comes close to the performance of the Wilson
Trucker Cellular Antenna, both on 800 and 1900 MHz (Digital or Analog).
Up to 90% of the power on
both transmit and receive is absorbed within the truck cab and the users head.
We solve this problem by channeling all the power from the cellphone to the
outside antenna. This results in our trucker antenna transmitting and receiving
over 10 times more signal than a cellphone used inside the truck without an
outside antenna.
The Wilson Trucker
Cellular Antenna was carefully designed to minimize loss and maximize gain on
both the 800 MHz and 1900 MHz bands. Wilson accomplished this by using a
phasing coil and a low loss coaxial phase reversing device that provides high
gain on both frequencies. Wilson's innovative design results in high efficiency
with low losses and will get the most signal to your cellular phone. Thanks to
these innovations and our attention to detail Wilson Electronics has the best
performing trucker cellular antenna available.
Usage
The Wilson Trucker
Cellular Antenna is a versatile cellular antenna that works great on trucks,
cars, boats, homes, or almost any other application. Its main benefit over our
other dual band antennas is the tall fiberglass shaft which gets it up and away
from anything which may interfere with its signal. This is especially useful on
large trucks and home installations. Works on any surface - metal, fiberglass,
wood, etc. (no ground is required).
Features:
- Dual-Band & Tri-Mode: 800MHz & 1900MHz
Analog and Digital
- Compatible with all Cellular, PCS and iDEN
providers
- Works great on Semi Trucks, RVs, Boats,
Homes or almost any other application
- No ground plane required: built-in ground
plane allows for use on any surface - Metal, Fiberglass, Wood, etc
- 19" Fiberglass mast raises antenna above
most obstructions
- Mounting options available for almost any
application
- Fits standard 3/8" * 24 threaded mount
- Over 10 times more signal than a cell phone
used inside vehicle without an external antenna
|
Electrical Properties |
|
|
|
|
Frequency
Range.... |
806-894 MHz |
|
|
1850-1990 MHz |
|
|
|
|
Impedance................. |
50 Ohms / Both
Bands |
|
|
|
|
Antenna Gain............ |
5.12 dBi 806 -
894 MHz |
|
|
6.12 dBi 1850 -
1990 MHz |
|
|
|
|
System Gain.............. |
10-15 dB (More
Than 10 Times the Signal) of a cellphone used inside a car / truck without
an outside antenna. |
|
|
|
|
Radiation.................... |
Omni |
|
|
|
|
Polarization................ |
Vertical |
|
|
|
|
Wavelength................ |
.9
Wavelength 806-894 MHz |
|
|
1.95 Wavelengths
1850-1990 MHz |
|
|
|
|
Ground Plane............ |
Built in Ground
Plane |
|
Mechanical Properties |
|
Connector..................... |
FME-Female |
|
|
|
|
Material.......................... |
Whip - Stainless
Steel |
|
|
Extension -
Fiberglass |
|
|
|
|
Coax Cable................... |
RG58 / 12' |
|
|
|
|
Height............................ |
32 5/8" |
|
|
|
|
Mount............................. |
Standard CB 3/8"
X 24 Thread |
