Up to
90% of the power on both transmit and receive is absorbed within a vehicle and
the users head. We solve this problem by channeling all the power from the
cellphone to the outside antenna. This results in our NMO antenna transmitting
and receiving over 10 times more signal than a cellphone used inside the vehicle
without an outside antenna.
The
Wilson NMO Cellular Antenna was carefully designed to minimize loss and maximize
gain on both the 800 MHz and 1900 MHz bands. Wilson accomplished this by using
a phasing coil and a low loss coaxial phase reversing device that provides high
gain on both frequencies. Wilson's innovative design results in high efficiency
with low losses and will get the most signal to your cellular phone. Thanks to
these innovations and our attention to detail Wilson Electronics has the best
performing NMO cellular antenna available.
Usage
The
Wilson NMO Cellular Antenna requires a standard NMO mount (sold separately).
Most NMO mounts are installed by drilling a hole in the roof of your vehicle.
The cable is then routed under the headliner to the cellphones location. This
provides for an excellent ground plane and very solid permanent installation.
Features:
- Dual-Band & Tri-Mode: 800MHz & 1900MHz Analog and Digital
- Compatible with all Cellular, PCS and iDEN providers
- Multiple NMO mounting options are available (sold
separately)
- Metal ground plane required
- 10 to 15 times more signal than a cell phone used inside
vehicle without an external antenna
- Patent Pending
