The Wilson Cellular Direct Connect 3 Watt Power Booster can increase your
cellular phone coverage up to 50 miles with up to 3 watts of output power. It
will greatly reduce disconnects, drop outs and noise as well as eliminating all
microwave energy radiating into your head. Your phone will use less battery
power with the improved signal giving you longer talk and standby times. The
unit amplifies 800MHz AMPS, TDMA, CDMA and GSM signals and passes through
1900MHz PCS signals providing up to 3 Watts of output power on the 800MHz band.
Not recommended for Sprint PCS, T-Mobile, Qwest or AT&T GSM users.
The Wilson Cellular Amplifier / Repeater has a
better receiver than what's in your cellphone. Its advanced electronics are very
sensitive and able to receive small signals which would go undetected by most
cellphones. It also has a better transmitter with double the power of your
cellphone. This allows your voice to be heard by distant cell sites, increasing
coverage up to 50 miles or more.
A cellphone using our amplifier is safer and
will use less battery power because the phone thinks it's much closer to a cell
site than it actually is. Phones vary their power output based on their
proximity to cell sites. Therefore, your phone transmits less power - resulting
in safer use and longer battery life.
This versatile cellular amplifer works great on trucks, cars, RVs, Boats,
Homes, Offices, or almost any other application
Features:
- Direct Connection features Increased reception.
- Works With All Dual-Band, Dual-Mode & Tri-Mode Phones on 800MHz
- Power Control Logic ensures Maximum Output Power is within Cellular
Standards
- Automatic Gain Control
- Mobile, Marine and In-Building Use
- Connects Directly to Cellphone with a Wilson Antenna Adapter (Sold
Separately)
- Greatly Reduces Disconnects, Drop Outs, and Noise
- Eliminates All Microwave Energy Radiating into the Head
- FCC Type Accepted
|
Specifications |
| Frequency:
|
824-894MHz Uplink
1850-1990MHz Downlink |
| Gain: |
Cell Site Controlled
Max 10/10 |
| Linear Output
Power |
+30dBm |
| Max RF
(up/down): |
+35dBm/+5dB |
| Noise Figure
(down): |
3.5dB Nominal |
| Power
Consumption: |
12V, 1.5A |
| Connectors |
FME-Male 50 Ohms
|
PACKAGE CONTENTS
a. 3 Watt Single Band Direct Connection Amplifier.
b. 12V DC plug-in power supply with ON/OFF switch.
c. 6ft. Adapter Extension Cable.
Requires External Antenna and compatible Phone Adapter (Sold separately).
Click here for Antennas and additional items.
Compatible with:
Recommended for
Verizon, Alltel, US Cellular, Midwest Wireless and other 800MHz cellular
carriers. Not recommended for Sprint PCS, T-Mobile, Qwest or AT&T GSM users.
Dual-Band or
1900MHz users/carriers should use the 811201 - Wilson Cellular 800MHz/1900MHz
Dual-Band 3 Watt Direct Connection Amplifier
Ideal for use with car kits requiring an
external antenna. Adapter may be required to connect to your particular car kit.