For use in signal distribution systems to split the amplified signal to up to
4 antennas with minimal signal loss. Weatherproof case for indoor or outdoor
use.
Our standard units are offered with N/Female connectors and are capable of
handling 10W of power into a matched load. These units are ideal for in-building
applications that require the combining or dividing of RF to accommodate
multiple antenna locations.
This 2-way splitter allows you to drive two interior antennas from a single
amplifier/repeater. Because you are splitting the signal each antenna will
receive approximately 1/2 of the signal which equates to about 70% of the
coverage distance when compared to driving a single antenna.
Connecting splitter to amplifier: Typically the splitter is connected
to the amplifier using the 2" 9913 coax extension but any length of 9913 cable
may be used.
Connecting antennas to the splitter:
·Most Wilson Electronics antennas may be connected directly to the
splitter using either the N/Male to FME/Male adapter or using a length of 9913
cable.
·The 301121 Wilson Cellular Dual-Band Ceiling Mount Dome antenna may only
be connected to the spliiter using a 9913 cable extension.
Specifications:
·Signal Reduction: 3.5dB
·Connectors: N/Female
|
