Helps protect amplifier from power surges such as those caused by lightning
strike to outside antenna.
Protector is inserted inline between outside antenna and amplifier. The
protector does not connect directly to the amplifier. Typically, a 2' 9913
jumper cable is used to connect the protector to the amplifier although any
length of 9913 coax may be used.
For example, you can run 9913 9913 coax from the Yagi on the roof to the
lightning protector (mounted just outside the building) and then another run of
9913 coax cable from the lightning protector to the amplifier mounted in the
building.
The lightning protector must be grounded.
Specifications:
- dB Loss: 0.2dB
- Connectors: N/Female, both ends
