Dual Band Roof Mount RV Trucker Antenna W/Spring 806-894 MHz 1850-1990 MHz

The Wilson RV / Trucker Outperforms the Competition

Up to 90% of the power on both transmit and receive is absorbed within a vehicle and the users head.  We solve this problem by channeling all the power from the cellphone to the outside antenna.  This results in our RV / trucker antenna transmitting and receiving over 10 times more signal than a cellphone used inside the vehicle without an outside antenna.

The Wilson RV / Trucker Cellular Antenna was carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands.  Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies.  Wilson's innovative design results in high efficiency with low losses and will get the most signal to your cellular phone.  Thanks to these innovations and our attention to detail Wilson Electronics has the best performing RV / trucker cellular antenna available.

Usage

The Wilson RV / Trucker Cellular Antenna is a versatile cellular antenna that works great on RVs, trucks, cars, boats, homes, or almost any other application.  Its main benefit over our other dual band antennas is its 5/8" by 7" threaded mounting rod which is designed to span roofs with large gaps such as the attics found in most RVs.  For installations through roofs without an attic we provide instructions on cutting the mounting rod - it is brass and cuts easily.  Works on any surface - metal, fiberglass, wood, etc. (no ground is required).

Features

• Dual-Band & Tri-Mode: 800MHz & 1900MHz Analog and Digital
• Compatible with all Cellular, PCS and iDEN providers
• Works great on Semi Trucks, RVs, Boats, Homes or almost any other application
• No ground plane required: built-in ground plane allows for use on any surface - Metal, Fiberglass, Wood, etc
• Built in spring reduces impact damage
• 5/8" x 7" threaded brass mounting rod spans the distance between RV's roof and headliner.
• 5/8" threaded brass rod can be easily cut for various mounting depths
• Includes all mounting hardware
• Over 10 times more signal than a cell phone used inside vehicle without an external antenna

 

Electrical Properties

Part #...........................

301119     Frequency Range.... 806-894 MHz   1850-1990 MHz     Impedance................. 50 Ohms / Both Bands     Antenna Gain............ 5.12 dBi   806 - 894 MHz   6.12 dBi   1850 - 1990 MHz     System Gain.............. 10-15 dB (More Than 10 Times the Signal) of a cellphone used inside a car, truck or RV without an outside antenna.     Radiation.................... Omni     Polarization................ Vertical     Wavelength................ .9 Wavelength          806-894 MHz   1.95 Wavelengths   1850-1990 MHz     Ground Plane............ Built in Ground Plane

 

Mechanical Properties
Connector.....................	FME-Female
Material..........................	Whip - Stainless Steel
Coax Cable...................	RG58 / 12.5'
Height............................	18" (24" Including Threaded Mount)
Mount.............................	5/8" by 7" Threaded Mounting Rod