 Back
Plug
Plugs into the adapter port on the upper back
portion of your phone. A rubber or plastic plug
may need to be removed. Press firmly to ensure a
good connection - do not twist. WARNING: Using
too much force could damage your phone. |
 Back
Plug w/ Top Replacement Antenna
(Figures-1&2) Unscrew your original antenna
which is blocking the adapter port - may have
reversed threads. (Figure-3) Screw your included
replacement antenna into the top of the phone.
Your antenna adapter will now fit into the back
of the phone - see above for Back Plug
instructions. |
 Bottom
Plug
Plugs into the bottom of your cellphone. Push
until you hear a click. Press button(s) in
middle or on sides to release connecter from
phone. Note: an RF charger may be available for
your phone - it will allow you to charge your
phone while using your external antenna. |
 Ring
Slide onto the base of your cellular phone's
built in antenna. Press down firmly to ensure a
good connection. Be sure to lower your phone's
built in antenna. This type of adapter is
available for only a few phone models. |
 RF
Charger
RF Chargers are antenna adapters that have a
built in battery charger. A single plug into the
bottom of your phone will allow you to charge
your phone while using your external antenna.
Without the RF Charger you would have to unplug
your charger to use your antenna. |
 Sleeve
Snap onto the back of your cellular phone. The
sleeve must be mounted to the top of your phone.
The sleeve may fit upside down but it will not
function properly. |
 Top
Plug
Plugs into the adapter port on the top of your
phone. A rubber plug may need to be removed.
Press firmly to ensure a good connection - do
not twist. Using too much force could damage
your phone. A small number of top plug phones
require the removal of the original antenna to
expose the port. |
 Top
Replacement Antenna
(Figure-1) Pry off plastic cap. Depress plastic
tab inside hole while forcefully pulling out the
original antenna. (Figure-2) Insert adapter plug
into phone with wires facing phone. (Figure-4)
Screw adapter into top of phone. (Figure-3) You
will need this replacement antenna after
disconnecting your antenna adapter. |
 Top
Screw
This antenna adapter replaces your cellular
phone's original antenna. Unscrew your original
antenna and screw in the antenna adapter. Be
sure to save your original antenna - you will
need to use it after disconnecting your antenna
adapter. |
 Side
Plug
Plugs into the adapter port on the upper-side of
your phone. A rubber plug may need to be
removed. Press firmly to ensure a good
connection - do not twist. Using too much force
could damage your phone. |
